Building Material (PVDF-PE)

 

Introduction

Mbond® Aluminium Composite Panel (Mbond ACP) is sandwich-type comprises of Polyethylene Plastic (PE) core which firmly bonded between two aluminium sheets. Surface of the aluminium sheet is coated with PPG KYNAR 500 PVDF resin for better color quality and higher chemical resistant. It has been proven the test of severe environment and has no abnormal pigmentation for 10 years.

In additional our Mbond® Aluminium Composite Panel (Mbond ACP) product had been tested at SIRIM QAS Sdn Bhd and acquired MS2571 : 2017 standard.

Product Composition

MBC Composition
MBond ® MBC Series Model & Specification
Specification
Panel Thickness 4.0mm
Top Aluminium Skin Thickness 0.40mm / 0.50mm
Bottom Aluminium Skin Thickness 0.40mm / 0.50mm
Standard Width 1,250mm
Standard Length 2,440mm , 4,880mm
Customized Length (Subject to Order Quantity) 2,440mm up tp 10,000mm

*Subject to tolerance

 

Product Specification

Alloy Grade : A3003
Advantages
  • High Strength
  • Perfect Flatness
  • High Rigidity
  • Bendable
Coating Type :
Polyvinylidene Fluoride (PVDF) PPG Kynar 500 Resin
Advantages
  • Highly Non-Reactive Thermoplastic Fluoropolymer with good resistance to solvent and acid bases chemicals

** Non-standard product (width, length, thickness, colour) are available subject to a minimum order quantity
** Thickness tolerance: subject to tolerance
** Colour only for reference, order based on sealed sample

 
 

Color Chart

MBC 9072
Metalic Silver

MBC 9073
Sub Silver

MBC 9095
Red

MBC 9021
Dark Blue

MBC 9075
Metalic Grey

MBC 9052
Metalic Black

MBC 9076
Champagne Silver

MBC 9012
Bronze

MBC 9091
Yellow

MBC 9093
Orange

MBC 9079
Grey

MBC 9051
Black

MBC 9082
White

MBC 9085
Matt White

MBC 9023
Finland Blue

MBC 9033
Green

MBC 9078
Metallic Dark Grey

 

Product Application

Building Exterior Facade
  • Architecture Facade Cladding
  • Curtain Wall
  • Curved Exterior Bullnose and Various Design to Architecture Desire
Interior Decorative Facade
  • Column Cover
  • Beam Warping
  • Boutique Facade Decoration
  • Structure Finishing Cover
 

Test Report & Certificate

 
Country Test Lab Test Standard Result Test Report Certificate
MalaysiaMALAYSIA SIRIM MS2571:2017 Passed Test Report Test Report Certificate
CIDB PPS   Certificate
 
 

Installation Direction

 

Mbond® Aluminium Composite Panel (Mbond ACP) must be installed in a uniform direction to avoid color shade refection differences as printed on all Mbond® MBC series protective firm. Kindly refer to illustration graph below.

  Example 1 (Proper Method)
Proper Method
  Example 2 (Wrong method)
Proper Method

Protective Film Removal Procedures

 

Mbond® Aluminium Composite Panel (Mbond ACP) Series is laminated with a layer of PE base protective film its highly recommended to be removed as soon as installation is completed with no more than 60 days to avoid glue to residue on the surface of the panel due to direct exposure to sun and humid weather conditions.

Before Remove Protection Film
Protective Film Removal Procedures
After Remove Protection Film
Protective Film Removal Procedures
 
 

Installation Method

 
 

Project Reference

 

HAVE

SOME ENQUIRIES?

We love to listen and hope to serve you better. Get in touch with us if you have any queries and we will get back to you as soon as possible.

CONTACT US